Cheap price Waterproof Automotive Wire Connector - M6 Mini Waterproof Electric Connector – Kenhon

Product Details

Company Description

Business Type: Industry and Trade Integration

Company Name: Shenzhen Kenhon Technology CO., Ltd.

Address: 95 Buildings, Mashan Fifth Industrial Zone, Matian Street, Guangming New District, Shenzhen, Guangdong, China

Fax: +86 755 27505502


Facebook / Skype: 18877499652

Kenhon M6 Mini Waterproof Electric Cable Connector IP65 Male Female 2 Pin Waterproof Plugs & Sockets

M6 specification


1: appearance, environment description


1.1 Shape reference size (length × width × height) (mm): subject to the actual object (drawings are for reference only).

1.2 Use of environmental conditions

Working temperature: -10 ° C ~ 80 ° C

Storage temperature: -10 ° C ~ 80 ° C

Atmospheric pressure: (86 ~ 106) KPa

Relative humidity: ≤90%

Waterproof rating: IP67


2: Product structure description

2.1 Wiring method: male and female interplug.

2.2 Maximum inlet diameter: Φ4.0mm

2.3 Connector contacts and plating: copper.

2.4 Contact plastic: PVC,

2.5 Silica gel.

Model No.:M6
Shape:  Circular
Color: Black, white, accept customization
Working temperature:  -40°C~ + 105°C
Storage temperature:-25°C~85°C
Atmospheric pressure: (86~106)KPA
Relative humidity:≤90%
Method: Injection with wire
Max cable OD:≤4.5mm
Wire materials: PVC, Rubber, Teflon and etc.


Wire knowledge - PVC wire


The PVC wire we usually say is actually the RVV wire, the full name of the copper core PVC insulated PVC sheathed flexible wire, also known as the light PVC sheathed cord, commonly known as the soft sheathed wire, is a sheathed wire. Kind. It is mainly used in power lines, control lines and signal transmission lines for electrical appliances, instruments and electronic equipment and automation devices, and can be used for anti-theft alarm systems and building intercom systems. The rated voltage is 300V/500V, the number of cores is from 2 cores to 24 cores according to the national standard color separation, the two cores are twisted and combined, and the outer stranding direction is right direction. It is widely used in instruments, instruments, buildings, intercom, monitoring and monitoring. Control installation.

Teflon characteristics introduction

Folding characteristics

1. Non-stick: almost all substances are not bonded to the Teflon coating. Very thin films also show good non-stick properties.

2. Heat resistance: The polytetrafluoroethylene coating film has excellent heat resistance and low temperature resistance. It can withstand high temperature to 300 °C in a short time. It can be used continuously between 240 °C and 260 °C. It has remarkable thermal stability. It can work at freezing temperature without embrittlement and does not melt at high temperature.

3. Slidability: The PTFE coating has a low coefficient of friction. The friction coefficient changes when the load slides, but the value is only between 0.05 and 0.15.

4. Moisture resistance: The surface of the PTFE coating film is not stained with water and oil. It is not easy to get into the solution during production. If there is a small amount of dirt, it can be removed by simple wiping. Short downtime, saving time and increasing productivity.

5, wear resistance: under high load, has excellent wear resistance. Under certain load, it has the dual advantages of wear resistance and non-sticking.

6. Corrosion resistance: PTFE is almost free from chemical attack and can withstand all kinds of strong acids (including aqua regia), strong oxidants and reductions except molten alkali metal, fluorinated medium and sodium hydroxide above 300 °C. The action of the agent and various organic solvents protects the part from any kind of chemical attack.

Folding chemistry

Insulation: It is not affected by the environment and frequency. The volume resistance can reach 1018 ohm·cm, the dielectric loss is small, and the breakdown voltage is high.

High and low temperature resistance: The influence on temperature is not changed much, and the temperature range is wide. The temperature can be used from -190 to 260 °C.

Self-lubricating: It has the smallest coefficient of friction in plastic and is an ideal oil-free lubricating material.

Non-sticky surface: Known solid materials do not adhere to the surface and are a solid material with minimal surface energy.

Resistance to atmospheric aging, radiation resistance and low permeability: long-term exposure to the atmosphere, surface and properties remain unchanged.

Non-combustible: The oxygen limit is below 90.

Polytetrafluoroethylene is widely used in industries that are resistant to high temperatures and require high viscosity. The strongest super acid, fluoroantimonic acid, can also be used for preservation.

The US "Akzo Nobel" company has developed a new non-toxic non-stick material. Because it is the secret recipe, it does not disclose the specific production method, but it claims to be absolutely safe and harmless, and has been used in the top cmaxlon products of the United States.

Product showcase

Our Services


1. Quick Response


2. Professional Manufacture


3. OEM/ODM available


4. Fast Delivery